In terms of operating efficiency and saving energy consumption, the use of automatic control valves is an indispensable part. The manual valves and pneumatic valves commonly used in the traditional industry are inferior to electric actuator valves in installation cost and efficiency.
The electric actuator valve is driven by power supply and feedback signal to drive the valve switch. It can be controlled manually or remotely. Because the electric actuator valve has the advantages of easy assembly, low failure rate and meeting the industry’s automation needs, it is a more cost-effective choice for the industry. Because of the use of general traditional pneumatic actuator valves, they need to be equipped with air pipes, solenoid valves and compressors. The electric actuator valve is driven by a motor, which is simple and easy to install, and the electric actuator valve can be installed in conjunction with the original automatic control circuit of the factory, which can save other costs. In addition, the motor-driven opening and closing is smooth, without the shortcomings of excessive momentary impulse, and the failure rate can be greatly reduced.
In industrial processes, valves are mostly used to control the travel and flow of various fluids, such as water, oil, chemical liquids, etc., based on parameters such as temperature, pressure and flow. There are several types of control valves commonly used in factories, such as pressure reducing valves, pneumatic thermostats, solenoid valve thermostat systems, proportional control valve thermostat systems, and temperature control valves. When selecting various types of automatic valves, factors such as the type of heat engine, the required accuracy, the quality of the control valve, the pressure drop, the flow rate and its structure, the failure rate, the manufacturer’s credit and after-sales service and other factors should be considered to achieve economic and practical purposes.
Many people think that the electric actuator valve is expensive and the cost of use is high. In fact, if it is calculated as a whole, the traditional valve needs to be installed with many accessories and pipelines. The price is not dominant, but it has to bear more maintenance costs. Electric actuator valves can help your projects to be automated faster, thereby reducing costs and improving work efficiency.